A 6.5-foot pickup bed holds about 2.3 cubic yards level full, and that load weighs anywhere from about 290 pounds of brush to over 2,000 pounds of dirt. This truck load calculator turns your bed or trailer and how full it is into cubic yards, then into pounds and tons for the material, checks the weight against payload and counts the trips. Below: bed volumes, weights per cubic yard, payload limits, item weights and trailer sizes.
6.5-foot bed, level full: 2.31 cubic yardshousehold junk: about 580 to 690 lb (0.29 to 0.35 ton)EPA 2016 density: 250 to 300 lb per loose cubic yard
Truck Load Calculator
6.5-ft bed, level fullEPA 2016
- Volume
- 2.31 yd³
- Weight
- 577 to 692 lb
- Tons
- 0.29 to 0.35
- Payload used
- 46%
- Trips for the job
Household junk weighs 250 to 300 lb per loose cubic yard (EPA). A 1,500-lb payload carries about 5.5 cubic yards of it, so the bed fills before the weight limit.
How Many Cubic Yards Are In A Pickup Truck Bed?
A full-size pickup bed holds about 2.0 cubic yards (5.5-foot bed), 2.3 cubic yards (6.5-foot bed) or 2.9 cubic yards (8-foot bed) when filled level to the top of the sides. Those figures come from Ford's published 2026 F-150 box volumes, which already account for the wheel wells.
The three F-150 boxes, from Ford's specifications1:
| Bed | Inside length at floor | Inside height | Cubic feet (Ford) | Cubic yards, level full | Heaped about 12 in (our estimate) |
|---|---|---|---|---|---|
| 5.5-ft box | 67.1 in | 21.4 in | 52.8 | 1.96 | about 2.4 |
| 6.5-ft box | 78.9 in | 21.4 in | 62.3 | 2.31 | about 2.8 |
| 8-ft box | 97.6 in | 21.4 in | 77.4 | 2.87 | about 3.5 |
We haven't verified other makers' bed volumes yet, so the calculator lets you enter your own dimensions. The heaped column assumes a tapered pile 12 inches above the rails, counted as half of a full box that tall. That is our assumption, not a manufacturer figure. A load above the rails also has to be tied down and covered.
Why do people say a pickup holds "1 to 1.5 yards"? That rule comes from soil and gravel yards. It describes how much heavy material a light truck can safely carry, not how much fits in the bed. The payload section below explains the difference.
How Do You Measure Your Truck Bed In Cubic Yards?
To measure a truck bed, multiply the inside length by the width by the depth in feet, then divide by 27. Measure the width at the floor between the bed walls, then subtract the wheel wells, because measuring only between the wheel wells undercounts the space.
A worked check on the 6.5-foot F-150 box shows why. Ford's inside length is 78.9 inches, the width between the wheelhouses is 50.6 inches and the depth is 21.4 inches1. Multiplied out, that is about 49 cubic feet, well short of Ford's 62.3. The missing 13 cubic feet sit beside the wheel wells, where the bed is wider. The steps:
- Measure the inside length at the floor, in inches.
- Measure the width at the floor, wall to wall, in inches.
- Measure the depth from the floor to the top of the side rail, in inches.
- Multiply the three and divide by 1,728 to get cubic feet.
- Subtract the wheel wells (or about 8% if you don't measure them; this is our rule of thumb), then divide by 27 for cubic yards.
How Much Does A Truck Load Of Trash Weigh?
A level-full pickup of loose household junk weighs about 490 to 860 pounds, depending on bed length, because loose trash weighs 250 to 300 pounds per cubic yard. Searches for "truck load of trash" also bring up garbage trucks. A neighborhood garbage truck holds 12 to 14 tons, a different vehicle entirely23.
The weight of a pickup load depends far more on the material than on the bed. These densities are EPA's April 2016 factors for loose material2:
| Material | Pounds per loose cubic yard | 5.5-ft bed, level (1.96 cu yd) | 6.5-ft bed, level (2.31 cu yd) | 8-ft bed, level (2.87 cu yd) |
|---|---|---|---|---|
| Branches and stumps | 127 | 250 lb | 290 lb | 360 lb |
| Carpet | 147 | 290 lb | 340 lb | 420 lb |
| Clean dimensional lumber | 169 | 330 lb | 390 lb | 480 lb |
| Household trash, uncompacted | 250 to 300 | 490 to 590 lb | 580 to 690 lb | 720 to 860 lb |
| Leaves | 250 to 500 | 490 to 980 lb | 580 to 1,150 lb | 720 to 1,430 lb |
| Mixed construction and demolition debris | 417 | 820 lb | 960 lb | 1,200 lb |
| Drywall (gypsum board) | 467 | 910 lb | 1,080 lb | 1,340 lb |
| Asphalt shingles (composition roofing) | 731 | 1,430 lb | 1,690 lb | 2,100 lb |
| Broken concrete | 860 | 1,680 lb | 1,980 lb | 2,470 lb |
| Dirt and sand | 929 | 1,820 lb | 2,140 lb | 2,660 lb |
| Large rock and gravel | 999 | 1,950 lb | 2,310 lb | 2,860 lb |
These are averages for loose material. Wet leaves, soaked carpet or packed debris weigh more, so treat the figure as the low end for a load that sat in the rain. Once you know the weight, our guide to how much the dump costs shows what sites charge for loads like these.
Why Does Broken Concrete Weigh Less Per Yard Than A Slab?
Broken concrete weighs about 860 pounds per loose cubic yard because of the air gaps between chunks. Solid concrete weighs about 140 to 155 pounds per cubic foot, which works out to roughly 3,800 to 4,200 pounds per cubic yard, about four to five times as much24.
That gap matters when you plan a patio or sidewalk tear-out. Measure the slab, multiply by the solid density for the weight, and remember that the broken pieces will take up more room than the slab did. A small slab can exceed a pickup's payload long before the bed looks full. Our concrete disposal guide lists recyclers that take clean concrete, often for less than a landfill.
How Much Weight Can A Pickup Carry?
A pickup's payload limit is printed on the tire and loading information placard on the driver's side door pillar. Federal rules require that placard to state the maximum combined weight of occupants and cargo5. A truck that may carry 1,500 pounds reaches that limit with about 1.6 cubic yards of dirt.
The placard number includes you and your passengers, so subtract their weight first. Ford lists maximum payloads for the 2026 F-150 from 1,405 to 2,440 pounds depending on engine and drive, and says the door-jamb label gives the capacity of a specific truck1. The table below uses 1,500 pounds of cargo as an example, not a class rating:
| Material | Cubic yards that weigh 1,500 lb | Share of a 6.5-ft bed (2.31 cu yd) |
|---|---|---|
| Large rock and gravel | 1.50 | 65% |
| Dirt and sand | 1.61 | 70% |
| Broken concrete | 1.74 | 75% |
| Asphalt shingles | 2.05 | 89% |
| Drywall | 3.21 | Bed fills first |
| Mixed construction debris | 3.60 | Bed fills first |
| Household trash | 5.0 to 6.0 | Bed fills first |
So heavy materials fill a pickup by weight, and light ones by volume. That is the real reason soil yards load "about a yard" into a light truck. Our guide on how to load a truck for the dump covers weight placement, tie-downs and trailer tongue weight.
How Much Do Common Items Weigh?
A refrigerator weighs about 250 pounds, a washer 150 pounds and a dryer 125 pounds, according to EPA. A queen innerspring mattress weighs about 100 pounds in Washington State's conversion table. These per-item weights power the item builder, which adds up a load piece by piece26.
| Item | Weight | Source |
|---|---|---|
| Refrigerator | 250 lb | EPA 2016 |
| Clothes washer | 150 lb | EPA 2016 |
| Stove | 150 lb | EPA 2016 |
| Clothes dryer | 125 lb | EPA 2016 |
| Dishwasher | 125 lb | EPA 2016 |
| CRT TV, larger than 19 inches | 73 lb | EPA 2016 |
| Flat-panel TV | 29 lb | EPA 2016 |
| Passenger or light truck tire | 22.5 lb | EPA 2016 |
| Mattress, queen hybrid | 115 lb | Washington Ecology (from a consumer review site) |
| Mattress, queen innerspring | 100 lb | Washington Ecology (from a consumer review site) |
| Mattress, foam | 55 lb | Washington Ecology |
Washington Ecology's mattress figures trace back to a consumer review website, so treat them as rough6. Bulky items also take more room than their weight suggests. A sofa or a mattress can fill half a short bed while weighing only 100 to 200 pounds, so the builder checks volume as well as weight.
How Many Cubic Yards Does A Utility Trailer Hold?
A 5 x 8 utility trailer with 2-foot sides holds about 3 cubic yards, and a 6 x 12 with 2-foot sides about 5.3 cubic yards. Trailer volume is simple geometry: floor length times width times side height in feet, divided by 27.
Trailers come with different side heights, so the table gives the volume per foot of height as well as for 2-foot sides.
| Trailer floor | Cubic yards per foot of side height | Cubic yards with 2-ft sides |
|---|---|---|
| 4 x 8 ft | 1.19 | 2.37 |
| 5 x 8 ft | 1.48 | 2.96 |
| 5 x 10 ft | 1.85 | 3.70 |
| 6 x 12 ft | 2.67 | 5.33 |
A trailer's weight limit is set by its axle and tire ratings and by what your vehicle may tow. A 6 x 12 trailer with 2-foot sides full of broken concrete would weigh about 4,600 pounds. Check the trailer's rating plate before you load anything that heavy.
How Many Trips Will Your Load Take?
Trips equal the total volume divided by the usable volume per trip. Usable volume is the smaller of two numbers: what fits in the bed, and how much of that material your payload allows. For light junk the bed sets the limit, and for dirt or concrete the payload does.
An example: a 6-cubic-yard pile of mixed renovation debris in a 6.5-foot bed. The bed holds 2.31 cubic yards, which weighs about 960 pounds, inside a 1,500-pound payload. So the job takes 6 divided by 2.31, rounded up: 3 trips. The same pile of broken concrete would be payload-limited at about 1.74 cubic yards a trip, so it takes 4.
To price those trips at a real site, estimate the dump fee with the load already filled in.
What Should You Do With The Load Once You Know Its Size?
Once you know the cubic yards and pounds, you can price the dump run, decide between trips and a dumpster, and secure the load for the road. These short answers point to the guide that covers each step.
How Much Debris Does A Remodel Make?
A kitchen remodel produced about 64 pounds of debris per square foot of kitchen, and a bathroom remodel about 72 pounds per square foot, in the job-site surveys EPA used for its 2003 construction debris estimate7. The remodel debris guide turns a room size into loads.
Is A Dumpster Better Than Several Pickup Trips?
A dumpster starts to make sense when the trip count climbs and each trip carries a fee, fuel and an hour or more of your time. The dumpster vs dump run comparison prices both with your local fees.
Do You Need To Cover A Heaped Load?
Yes. A heaped load is the most likely to shed debris on the road, state laws on unsecured loads apply, and many dumps charge extra when a load arrives uncovered. See tarp laws by state for the rule where you live and real facility fees for uncovered loads.
Sources
- Ford Motor Company, "2026 Ford F-150 Pickup Technical Specifications" (03/31/26, V1.1), cargo capacities and payload, https://www.fromtheroad.ford.com/content/dam/fordmediasite/us/en/library/2026/specs/2026_Ford_F150_Specs.pdf, accessed November 12, 2026.
- U.S. EPA, "Volume-to-Weight Conversion Factors" (April 2016), https://www.epa.gov/sites/default/files/2016-04/documents/volume_to_weight_conversion_factors_memorandum_04192016_508fnl.pdf, accessed November 12, 2026.
- South Carolina Department of Environmental Services, "How Landfills Work," https://des.sc.gov/programs/bureau-land-waste-management/landfills/how-landfills-work, accessed October 24, 2026.
- Federal Highway Administration, FHWA-HRT-05-057, Appendix C, "Proposed Revisions to the AASHTO Standard Specifications for Highway Bridges" (unit weight of normal-weight concrete), https://www.fhwa.dot.gov/publications/research/infrastructure/bridge/05057/appc.cfm, accessed October 24, 2026.
- 49 CFR 571.110, Federal Motor Vehicle Safety Standard No. 110, S4.3 (vehicle placard), via Cornell LII, https://www.law.cornell.edu/cfr/text/49/571.110, accessed October 24, 2026.
- Washington State Department of Ecology, Pub. No. 15-07-004, "Measurement Standards for Solid Waste and Recovered Materials: Volume-to-Weight Conversion Factors" (updated February 2019), https://apps.ecology.wa.gov/publications/documents/1507004.pdf, accessed October 24, 2026.
- U.S. EPA, "Estimating 2003 Building-Related Construction and Demolition Materials Amounts" (EPA530-R-09-002, March 2009), Table 2-5, https://www.epa.gov/sites/default/files/2017-09/documents/estimating2003buildingrelatedcanddmaterialsamounts.pdf, accessed October 24, 2026.